What to do if both the light and fan do not work on Klarstein Contempo?
If both the light and fan on your Klarstein Ventilation Hood aren't working, there are a couple of things to check. First, the light bulb may have burned out; replace it with a bulb of the correct rating. Second, the power cord might be loose; make sure it's securely plugged into the power supply.
What to do if Klarstein Contempo Ventilation Hood has serious vibration?
If your Klarstein Ventilation Hood is vibrating excessively, there could be a few reasons. First, the fan blade may be damaged. Second, the fan motor might not be tightly fixed. Finally, the unit may not be properly hung on the bracket. In any of these cases, switch off the unit. If the unit is not hung properly on the bracket, take down the unit and check whether the bracket is in proper location. For other cases repair by qualified service personnel only.
How to fix a Klarstein Contempo when the light is on, but the fan does not work?
If the light is on but the fan isn't working on your Klarstein Ventilation Hood, the fan blade might be jammed. Switch off the unit and have it repaired by qualified service personnel only.
Why is my Klarstein Contempo Ventilation Hood light on but the motor isn't running?
If the light is on but the motor of your Klarstein Ventilation Hood isn't running, it could be due to several reasons. The ventilation might be blocked, in which case you should remove the blockage. Alternatively, the capacitor or the motor itself could be broken and needs replacement. Also, if the motor smells strange, it likely requires replacement.
What to do if my Klarstein Contempo is not properly extracting air?
If your Klarstein Ventilation Hood isn't extracting air properly, the distance between the cooker and the hood might be too far; reduce this distance. Also, excessive air circulation from open windows and doors can be the cause; make sure there are no draughts.
What to do if my Klarstein Contempo Ventilation Hood is vibrating?
If your Klarstein Ventilation Hood's housing is vibrating, it could be due to a damaged rotor blade of the fan, which needs replacement. Another cause might be that the motor isn't firmly seated; fasten the motor. Also, ensure the casing is securely fastened.
Why is my Klarstein Contempo Ventilation Hood tilting?
If your Klarstein Ventilation Hood is tilting, the mounting screws are likely not tightened. Tighten the fixing screws and ensure the hood is level.
What to do if my Klarstein Ventilation Hood light is off and the motor won't run?
If the light is off and the motor isn't running on your Klarstein Ventilation Hood, the light might be broken and needs replacement. Also, check if the power plug is loose and plug it securely into the wall socket.
Why is the suction performance not good on my Klarstein Contempo Ventilation Hood?
If the suction performance of your Klarstein Ventilation Hood isn't as good as it should be, it might be because the distance between the unit and the cooking plane is too great. Readjust the distance so that it is between 65 and 75 cm.
Why is my Klarstein Ventilation Hood leaking oil?
If your Klarstein Ventilation Hood is leaking oil, the outlet and ventilation inlet are likely not tightly sealed. Take off the outlet and seal it with glue.
General| Number of speeds | 3 |
|---|---|
| Width | 60 cm |
| Material | Stainless steel |
| Operating Modes | Extraction/Recirculation |
| Lighting | LED |
| Grease filter material | Aluminum |
| Filter Type | Charcoal filter (optional) |
Steps and requirements before installing the cooker hood, including duct connection.
Details for installing the cooker hood for external ventilation.
Procedure for mounting the cooker hood onto a wall.
Explanation of the buttons and their functions for operating the cooker hood.
Details on using the touch control panel for various functions.
General guidelines for cleaning the cooker hood unit.
Instructions for monthly cleaning of the grease filter for optimal performance.
Guidance for annual cleaning or replacement of the activated carbon filter.
Step-by-step instructions for replacing the LED lamp in the cooker hood.
To Next Page