Why is my Klarstein Royal Flush Eco Ventilation Hood not sucking properly?
If your Klarstein Ventilation Hood's suction performance is not optimal, it might be due to an excessive distance between the unit and the cooking surface. Adjust the distance to be within 65-75cm.
What to do if my Klarstein Royal Flush Eco is vibrating a lot?
If your Klarstein Ventilation Hood is vibrating excessively, the fan blade might be damaged. In this case, switch off the unit and have it repaired by qualified service personnel only. Also, take down the unit and check whether the bracket is in the proper location.
What to do if Klarstein Royal Flush Eco light is on but the fan isn't working?
If the light of your Klarstein Ventilation Hood is on but the fan isn't working, the fan blade might be jammed. Turn off the unit and have it repaired by qualified service personnel only.
What to do if Klarstein Royal Flush Eco has serious vibration?
If your Klarstein Ventilation Hood is vibrating seriously, the fan blade might be damaged. If this is the case, switch off the unit and have it repaired by qualified service personnel only. Also, take down the unit and check whether the bracket is in the proper location.
Why is the suction performance of my Klarstein Ventilation Hood not good?
The suction performance might be poor because the distance between the unit and the cooking plane is too long. Readjust the distance to 65-75 cm.
What to do if my Klarstein Ventilation Hood is vibrating seriously?
Serious vibration can occur if: * The fan blade is damaged. In this case, switch off the unit and have it repaired by qualified service personnel only. * The unit is not hung properly on the bracket. Take down the unit and check whether the bracket is in the proper location.
How to fix a Klarstein Ventilation Hood when the light is on, but the fan doesn't work?
If the light is on but the fan isn't working, the fan blade may be jammed. Switch off the unit and have it repaired by qualified service personnel only.
General| Brand | Klarstein |
|---|---|
| Model | Royal Flush Eco |
| Category | Ventilation Hood |
| Language | English |
Guidance on air discharge and regulations for installation.
Warnings about poisoning from exhaust gases and ensuring adequate airflow.
Notes on reversing installation steps and safety during disassembly.
Instructions for using the hood for external air extraction, including filter removal.
Steps to mount carbon filters for recirculation mode operation.
Guidance on checking voltage compatibility and making electrical connections.
Instructions for fitting grease and carbon filters correctly.
Visual steps and requirements for physically installing the hood.
Recommendations for cleaning and maintaining stainless steel surfaces.
Procedures for cleaning or replacing grease filters.
To Next Page