What to do if my Klarstein TK15-Beretta-SS light and motor are not working?
If the light and the motor of your Klarstein Ventilation Hood aren't working, check your house fuse, as it may be flipped or broken, and replace it if necessary. Also, ensure the power cord is properly connected.
Why is my Klarstein Ventilation Hood exhaust performance unsatisfactory?
If your Klarstein Ventilation Hood's exhaust performance is unsatisfactory, the distance between the stove and the hood might be too great. Try reducing this distance.
How to fix a Klarstein TK15-Beretta-SS that is hanging awry?
If your Klarstein Ventilation Hood is hanging crooked, it could be due to a fixing screw not being properly tightened. Make sure to tighten all screws securely.
What to do if Klarstein TK15-Beretta-SS Ventilation Hood light is on but the motor doesn't run?
If the light on your Klarstein Ventilation Hood is on but the motor isn't running, first, ensure the motor isn't switched off. If it is, switch it on using the SPEED button. If that doesn't work, contact a specialist, as the motor switch or the motor itself may be broken.
How to fix a Klarstein TK15-Beretta-SS Ventilation Hood light that does not work?
If the light on your Klarstein Ventilation Hood isn't working, the bulb might be broken. Replace the bulb.
Ensure adequate ventilation and follow regulations concerning air discharge.
Steps to install the V-flap if it is not pre-assembled.
Connect the hood via a suction duct to an outside air outlet.
Steps for inserting and securing the grease filters into the cooker hood.
General| Material | Stainless steel |
|---|---|
| Width | 60 cm |
| Lighting | 2 x 1.5W LED |
| Control Type | Mechanical |
| Energy efficiency class | A |
| Number of fan speeds | 3 |
| Filter type | Aluminum grease filter |
| Voltage | 220-240 V |
| Type | Wall mounted |
| Power consumption in off-mode | 0 W |
| Power consumption in standby mode | 0 W |
| Frequency | 50 Hz |
To Next Page