Klarstein 10032679 - Adding Rinsing Salt; Salt Container Filling Procedure

34
EN
ADDING RINSING SALT
Only use rinsing salt that is intended for use in the dishwasher.
The salt container is under the basket and should be lled as follows:
• Any other type of salt that is not specically designed for the dishwasher, especially
table salt, will damage the container. In the case of damage caused by the use of
unsuitable salt, the guarantee will expire and the manufacturer will not be liable for
any damage caused.
• Fill the device with rinsing salt before starting a run. This avoids spilled salt grains
that remain on the oor of the machine for an indenite period, which can lead to
corrosion.
How to ll in the rinsing salt
A
Remove the basket and unscrew the cap from the salt container.
B
Add 1 liter of water to the salt container before the rst wash.
C
Insert the end of the funnel (supplied) into the hole and pour in about 130g of
salt. It is normal for a small amount of water to come out of the salt container.
D
After lling, tighten the cap clockwise.
E
The salt warning lamp usually goes out within 2-6 days after lling the salt
container.
F
Immediately after lling the salt into the salt container, a washing program
should be started (e.g., the quick program). Otherwise, the lter system, the
pump or other important parts of the machine may be damaged by salt water.