Klarstein 10032679 - Drying and Cutlery Issues; Error Code Explanations

47
EN
Problem Possible cause Solution
Dishes do not dry. Wrong loading. Follow the instructions for
loading the dishwasher.
The dishes were removed
too soon.
After cleaning, leave the
dishes in the dishwasher
for about 15 minutes.
Open the door so that the
humid air can escape.
Wrong program. In short programs, the
washing and drying
temperatures are lower.
Use a program with a
longer runtime.
Cutlery with inferior
coating.
Such dishes and cutlery
are not suitable for the
dishwasher.
Error codes
Code Meaning Possible cause
E1 During the water inlet step,
if the ow meter can‘t detect
the dened water after 4
Minutes , or can’t detect
30 pulse after 60s, the
dishwasher will warning
for E1.
• check the water supply
• check the inlet valve
• check the inlet
• check the owmeter
• check the pressure switch
• check the drain
• check the PCB
E3 Temperature has not been
reached.
Problems with the heating. Contact a
qualied professional.
E4 Water is overowing. There is a leak somewhere. Contact a
qualied professional.
E9 The buttons are not working
properly.
Display damage or material defect.
Contact a qualied professional.
Ed Communication problem.
Contact a qualied professional.EF Water tank problem.
EA Generator problem.