34
EN
The max
angle
is not
over 90
degree.
Cartridge
holder
CO
2
cartridge
Cover
assembly
Figure 10 Figure 11
Figure 12
5. Close the lid of the beer cooler. When pouring out the beer, the turn the knob on the
lid to “+” position to release the CO
2
, and turn it to “-“position when pause or stop
pouring beer to close the CO
2
. Please refer to the notice label on the lid.
6. Turn on the power switch to “I” position to power on the beer cooler (while
CAUTION
Risk of electric shock! Please make sure your hands are dry when you
operate the beer cooler, to avoid electric shock.
Switch is on “off ” status
Connect to power supply
Figure 13
Note for the controller on the lid:
• Turn off the CO
2
knob when cooling
the beer.
• Turn off the CO
2
knob when the
• Turn off the CO
2
knob when
changing the CO
2
cartridge.
• When the beer can not be tapped
out (there is still beer in keg),or beer
foams are not enough, turn the knob
turn off it again.
To Next Page
Loading...
