EasyManua.ls Logo

Klarstein CHILLPRO - Page 34

Klarstein CHILLPRO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
EN
installation is complete.
If the power cord is damaged, it must be replaced by the manufacturer,
customer service or a similarly qualied person to avoid danger.
The temperature of the refrigerant circuit will be high. Keep the connection
cable away from the copper pipes.
The appliance must be installed according to the national wiring regulations.
The air conditioner is a high quality electrical appliance. It must be earthed by
a qualied person using a special earthing device. Always make sure that the
earthing has been done correctly, otherwise there is a risk of electric shock.
The yellow-green cable of the air conditioner is the earth cable and must not
be used for other purposes.
The earthing resistance should comply with national electrical safety
regulations.
The appliance must be installed so that the power cord is easily accessible.
All cables and wires of the appliance should be connected by a qualied
person.•
If the power cord is not long enough, contact Customer Service to request a
longer cord. Do not attempt to extend the cable yourself.
For air conditioners without a mains plug, a circuit breaker must be installed
in the line.
For air conditioners without a power cord, a circuit breaker must be installed
in the line. If you want to use the air conditioner in another location, have it
dismantled and reinstalled by a person qualied to do so.
Otherwise, damage to property and/or personal injury could result. Select an
installation location that is out of the reach of children and at a safe distance
from plants and animals.
The indoor air conditioner should be installed close to the wall.
Installation instructions for this appliance are provided by the manufacturer.
The appliance must be stored in a way that prevents mechanical damage from
occurring.
Special notes
Use only manufacturer recommended methods to speed up the defrosting
process or to perform cleaning.
If repairs are required, contact the customer service department. Repairs
carried out by persons who are not qualied to do so can be dangerous.
The appliance should be stored in a room without permanent potential
sources of ignition, such as naked ames, a gas appliance that is switched on
or an electric heater.
Do not pierce or burn the appliance.
The appliance has been lled with the ammable gas R32.
Follow the operating instructions exactly when carrying out repairs.
Be aware that the refrigerant is odourless. Carefully read the refrigerant's
operating instructions.
If any of the above mentioned phenomena occur, turn off the air conditioner
and immediately disconnect the power cord from the power outlet and
contact the service centre or a similarly qualied person for repair and

Table of Contents

Related product manuals