EasyManua.ls Logo

Klarstein CHILLPRO - Care and Maintenance

Klarstein CHILLPRO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
EN
CARE AND MAINTENANCE
Cleaning the lter
The panel lter is the only component that requires regular maintenance.
Regular inspection and cleaning to prevent the lter from being blocked by
dust.
The lter needs to be cleaned frequently to ensure the cooling and heating
effect. Pull out the lter from the panel before cleaning.
The lter needs to be cleaned when it is blocked.
Use a vacuum cleaner or tap the lter lightly to remove loose dust and dirt
from the lters and then rinse thoroughly under running water (no hotter
than 40 °C).
Dry thoroughly before replacing.
Note: Never operate the unit without the lters.
Screw inspection
It is recommended to check the tightness of all screws 3 months after the rst
installation.
If the Caravan is running for a long time, regular inspections are required
every 12 months.
Maintenance
It is recommended that the air conditioner be operated on a regular basis to
ensure that all performances work well.
If the Caravan is not used for a long time, it is recommended to turn on the air
conditioner once every 6 months and run for 20–30 minutes each time.
If the Caravan is parked outdoors for a long time, it is recommended to use a
protective cover to protect the outdoor unit.

Table of Contents

Related product manuals