27
EN
CLEANING AND CARE
Before cleaning
• Turn off the device and unplug the power cord. Always unplug the power cord
before cleaning to avoid electric shock or mechanical damage.
• Use a commercially available cleaning agent and a soft brush for cleaning. Do not
use chemical cleaners.
Cleaning the surface
• Wipe the surface with a damp cloth. Do not use water, as it could penetrate the unit
and damage the electronics.
• Do not use corrosive cleaning agents or solvents.
Maintenance
• If the product is not going to be in use for a long time, unplug the power cord and
pack it away to prevent dust from entering the case.
• After packing, store it in a dry, ventilated place.
Filter cleaning
Remove the lter assembly in the order
shown on the left. Clean the lter
assembly with detergent and a soft brush,
then dry the lter assembly thoroughly
before reinserting it in the order shown.
To Next Page
Loading...
