28
EN
GENERAL OPERATION
Clean and prepare the ice cream machine
Before using the appliance for the rst time, clean all parts that come into contact
with the ice cream. These include the xed bowl, the removable container, the
stirring knife, the transparent lid, the rell lid and the spoon. Place the ice cream
maker upright on a at surface so that the compressor can work at its best.
1
Prepare the ingredients according to
the list of ingredients in the recipe
section of the instruction manual.
You don't need to cool the ice cream
container extra beforehand. The
appliance has a built-in compressor
that cools the ingredients during ice
cream preparation. Pour the prepared
ingredients into the removable
container and mix well.
2
Insert the ice cream container into the
ice cream maker and turn it around
slightly until it is rmly attached to the
xed bowl.
3
Insert the stirring blade into the
removable container and make sure
that the lower part of the stirring
blade is rmly connected to the motor.
Place the transparent lid on the ice
cream maker and screw it on counter-
clockwise.
4
Insert the plug into the socket and press the POWER button to switch on
the unit.
5 Then press the MENU button to select the working mode.
6 Press the TIME button to adjust the working time.
To Next Page
Loading...
