48
EN
Connecting the water inlet hose to the water tap
Connect the cold water inlet hose
to a 3/4" thread and make sure
that the connection is properly
tightened. If the water pipes are
new or have not been used for
a long period of time, run the
water to ensure that the water is
clean and free of impurities. If this
precaution is not taken, there is
a risk that the water inlet may be
blocked, causing damage to the
appliance.
Note: If the water inlet hose cannot be connected to your tap, contact a
plumbing store where you can purchase the appropriate adapters.
Connecting the water inlet hose to the dishwasher
To Next Page
Loading...
