53
EN
There are a total of 6 salt consumption levels. It is recommended to select the
stage according to the information in the table below:
Water hardness Adjusting
the water
softener
Renewal takes place
after all X program-
me sequences
4)
Salt
consumption
(gram/cycle)
°dH
1)
Mmol/l
2)
0-5 0-0.94 H1 No 0
6-11 1.0-2.0 H2 10 4
12-17 2.1-3.0 H3
3)
5 8
18-22 3.1-4.0 H4 3 13
23-24 4.1-6.0 H5 2 20
35-55 6.1-9.8 H6 1 40
1) German unit of measurement for water hardness
2) Millimol, international unit of measurement for water hardness
3) Factory setting
4) Rell water softener. The water softener must be relled regularly to ensure
the water softening function. An additional 0.2 litres of water must be added
for each rell. The energy consumption is increased by 0.01 kWh and the
programme is extended by 4 minutes.
Contact the local waterworks for information on the water hardness of your
water supplier.
To Next Page
Loading...
