65
EN
1 2
Pull the spray arm out upwards to
remove it.
Clean the spray arm with warm soapy
water and clean the nozzles with a
soft toothbrush. Then rinse the spray
arm with clear water and put it back
in place.
Anti-Freeze
If you live in a region where indoor temperatures can drop below 0 °C, precautions
must be taken to avoid possible damage to the dishwasher if the water inside it
freezes.
1. Switch o the dishwasher and disconnect the power plug from the socket.
2. Turn o the water tap and disconnect the water inlet pipe from the water
valve. Drain the water in the hose and reconnect the water inlet pipe to the
water valve.
3. Remove the lters and absorb as much water as possible with a sponge. Then
put the lters back together.
Cleaning
Only use gentle detergents on the outer surface of the dishwasher and do not use
aggressive or abrasive detergents. Special stainless steel cleaners can be used to
polish up the inside surface of the stainless steel.
Storage
Pull the power plug out of the socket and disconnect the water inlet pipe from
the water valve. Remove the lters and absorb as much water as possible with a
sponge. This minimises the formation of odours in the pipes.
To Next Page
Loading...
