70
EN
Error codes
If a malfunction occurs, the dishwasher indicates the cause by the corresponding
error code.
Code Meaning Potential cause
E1 The water intake takes
a very long time.
The water supply is interrupted, the tap is
closed or the water pressure is too low.
E3 The required
temperature is not
reached.
Malfunction of the heating element.
E4 The dishwasher is
leaking.
This can be caused by large dishes that
prevent the door from closing properly.
Defect in the pump-down system or
defective seal.
Ed Communication
between the display
module and the control
module is interrupted.
Wiring error between both modules.
To Next Page
Loading...
