What to do if the Klarstein Kristall's 'lack of water' light is on?
If the 'lack of water' indicator light is illuminated on your Klarstein Ice Maker, it could be due to insufficient water in the water box. Add enough water to the water box. Alternatively, the floater might not be installed correctly, in which case you should call the service center.
Why are the indicator lights on my Klarstein Ice Maker display not on?
If the indicator lights on your Klarstein Ice Maker's display are not illuminated, it could be due to a blown fuse or a lack of power. Try replacing the fuse or turning the power on.
Why does my Klarstein Kristall compressor make a buzzing noise?
If your Klarstein Ice Maker's compressor is making a buzzing noise, it may be due to a voltage lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
How to fix Klarstein Kristall Ice Maker when the ice is too large?
If the ice produced by your Klarstein Ice Maker is too large and the pieces are sticking together, it could be because the water temperature is too low. Select a smaller ice size. It may also be due to ice from previous cycles being left in the water tray; remove the ice under the standby state.
What to do if all the indicators on my Klarstein Ice Maker are twinkling?
If all the indicators on your Klarstein Ice Maker are twinkling simultaneously, it could be that the ice is not accessible to the ice board. Unplug the power and plug it in again to restart the machine. It may also indicate that the movable detect device on the ice board is damaged, in which case you should call the service center.
Why is my Klarstein Ice Maker not making ice even though the program is running?
If your Klarstein Ice Maker is running the ice-making program correctly but no ice is being produced, it could be due to no coolant in the compressor. In this case, call the service center. Other potential causes include a damaged compressor or fan motor, but no solutions are provided for these scenarios.
What does it mean if my Klarstein Kristall is full of ice but the 'full' indicator isn't on?
If your Klarstein Ice Maker is full of ice reaching the ice board, but the 'full' indicator isn't illuminated, it could be that the movable detect device on the ice board is damaged, in which case you should call the service center. Another possibility is that the indicator light itself is damaged, but no solution is provided in this case.
General| Brand | Klarstein |
|---|---|
| Model | Kristall |
| Ice Cube Shape | Bullet |
| Ice Cube Sizes | Small, Medium, Large |
| Material | Plastic |
| Type | Ice Maker |
| Ice Production Capacity | 12 kg/24h |
To Next Page