What to do if the Klarstein On-The-Rocks Ice Maker water shortage indicator light is on?
If the water shortage indicator light is illuminated on your Klarstein Ice Maker, it means that either there is no water in the unit, or the pump is full of air. Add water to the MAX position. If that doesn't resolve the issue, press the POWER button to restart the ice maker.
Why do all the Klarstein Ice Maker indicators twinkle simultaneously?
If all indicators on your Klarstein Ice Maker are twinkling simultaneously, it means the water tray is blocked by an ice cube. Unplug the power to remove the ice blocking the tray. Then, plug the power back in and press the POWER button. The machine will restart after 3 minutes.
What to do if the Klarstein Ice Maker is making ice that is too large?
If your Klarstein Ice Maker is producing ice that is too large and the pieces are sticking together, it could be due to low water temperature or ice from previous cycles remaining in the water tray. Try selecting the small ice size. Also, remove any ice left in the water tray while the unit is in standby mode.
How to fix a Klarstein On-The-Rocks with indicator lights that are not on?
If the indicator lights on your Klarstein Ice Maker display are not illuminated, it indicates a blown fuse or a lack of power. Replace the fuse or turn the power on.
Why does my Klarstein Ice Maker compressor make a buzzing noise?
If the compressor in your Klarstein Ice Maker is making a buzzing noise, it is likely due to a voltage lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
General| Ice cube shape | Bullet |
|---|---|
| Production capacity | 12 kg / 24 h |
| Water tank capacity | 2.1 Liters |
| Refrigerant | R600a |
| Power consumption | 120 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Plastic |
| Dimensions (W x D x H) | 245 x 345 x 340 mm |
Describes the function and indicator of the power button for operation and standby states.
Explains how to select ice size and activate the pipeline self-clean process.
Details the indicator for insufficient water and the required action.
Explains the indicator for a full ice collection and the necessary steps.
To Next Page