How to fix a Klarstein Ice Maker that does not work?
If the Klarstein Ice Maker does not work, it could be due to too low voltage. Turn off the appliance, check the wall socket, and if it is working, turn the appliance on again. The ambient temperature might also be too low (lower than 10 °C). Try again if the ambient temperature is above 10 °C.
What to do if the indicator light 'WATER LOW' illuminates on my Klarstein Icetender Ice Maker?
If the indicator light "WATER LOW" is on, it means that the Klarstein Ice Maker is not supplied with water. Check the water supply to ensure everything is in order and then restart the appliance. It could also mean that the water inlet valve is damaged, so check the water inlet valve. For tap water, the water pressure should not be lower than 1 kg/cm2.
Why the compressor of my Klarstein Icetender Ice Maker does not work?
If the compressor of your Klarstein Ice Maker does not work, check the water inlet (water valve and water inlet tube). Also, if the ice storage container is full, take out some ice. In case the compressor stops automatically because the temperature of the outer casing is too high, switch off the appliance and switch it on again after 1 hour.
What to do if the compressor works, but my Klarstein Icetender is not making ice?
If your Klarstein Ice Maker's compressor works, but no ice is made, there could be several reasons: * Refrigerant leaks: Refill the refrigerant and perform a leak test. * The refrigerating system is blocked: Replace the filter for the N2 filling system. * The solenoid valve opens continuously: Replace the solenoid valve. * The condensation fan does not work: Check that the condensation fan is working. * The filter element does not react: Check that the filter element is working and in the correct position.
Steps to install the filter unit with diagrams.
Detailed instructions for inserting the filter core and components.
To Next Page
General