Klarstein Ice Volcano 2G

Questions and Answers

B
Belinda GrayJul 28, 2025
What to do if the F symbol flashes on my Klarstein Ice Volcano 2G Ice Maker?
- S
  Stephanie MurphyJul 28, 2025
  If the symbol is lightening and the letter “F” flashes on your Klarstein Ice Maker, it could mean one of two things. First, there might be too much ice, in which case you should remove some ice cubes. Alternatively, there might be no ice cube inside. In that case, remove any obstacles or clean the inside wall of the ice storage. If it still doesn’t start, press “SELECT” for more than 5 seconds to run the ice making for 10 cycles at most.
K
Karen LoweAug 3, 2025
How to fix the flashing arrow symbol on my Klarstein Ice Volcano 2G?
- M
  Mark CurryAug 3, 2025
  If the symbol is lightening on and the arrow flashes on your Klarstein Ice Maker, it means there is a lack of water. To resolve this, stop the ice maker, fill it with water, and press the “ON/ OFF” button again to restart the unit.
R
robert47Aug 8, 2025
Why is my Klarstein Ice Volcano 2G cycle normal but no ice is made?
- J
  justindelacruzAug 9, 2025
  If your Klarstein Ice Maker is running normally but not producing ice, it could be due to several reasons: * The ambient or water temperature in the inner tank might be too high. Try running the ice maker below 32°C and use colder water. * There could be a refrigerant liquid leakage or a blocked pipe in the cooling system. You should ask a qualified technician to verify these issues.
M
Melissa TaylorAug 14, 2025
Why do ice cubes stick together in my Klarstein Ice Volcano 2G?
- H
  Hayley McclureAug 14, 2025
  If ice cubes on the evaporator stick together in your Klarstein Ice Maker, it could be due to: 1. The ice cycle being too long. Stop the ice maker and restart it after the ice blocks melt. Also, select the small size ice cube option. 2. The water temperature in the inner tank being too low. Change the water in the inner tank, ensuring the temperature is between 7°C and 32°C.
S
Stephanie GuzmanAug 20, 2025
What to do if my Klarstein Ice Maker won’t dispense ice?
- T
  Tina LarsonAug 21, 2025
  If your Klarstein Ice Maker has ice cubes inside but won’t dispense them when you push the “ICE” button, the moving shaft for the ice cube may be blocked. Release the button for ice-cube for 3 seconds, then push the “ICE” button again.

Summary

Safety Instructions

Product Overview

Use and Operation

Before First Use

Instructions for unpacking, cleaning, and placing the ice maker before initial use.

Operation

Detailed steps for operating the ice maker, including filling water and starting the ice-making process.

Troubleshooting

Cleaning and Care

Hints on Disposal

Klarstein Ice Volcano 2G Specifications

General

Ice shapes	Bullet ice
Product type	Portable ice cube maker
Product color	Black
Number of cubes	9
Built-in display	Yes
Housing material	Plastic
Preparation time	12 min
Freezing capacity	13 kg/24h
Water tank capacity	3 L
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz