Why is my Klarstein Ice Maker not working?
Your Klarstein Ice Maker might not be working due to a power or water supply issue. Check the fuses, power switch, cable, water switch, power plug, and sockets. Alternatively, the ice tray baffle may not be closing and opening automatically.
Why does my Klarstein Ice Maker stop 3 minutes after I turn it on?
If your Klarstein Ice Maker stops 3 minutes after being turned on, it could be due to high voltage protection triggered by a high temperature environment. Also, a dirty condenser filter or a damaged fan motor can cause this issue.
What to do if ice doesn't fall off the ice tray in my Klarstein Ice Maker?
If ice isn't falling off the tray in your Klarstein Ice Maker, start by cleaning and disinfecting the ice tray. Ensure the machine is placed on level ground. The environment temperature should be higher 5°C. If the issue persists, the solenoid valve may need replacement.
What to do if my Klarstein Ice Maker only makes one tray of ice each time?
If your Klarstein Ice Maker only makes one tray of ice each time it's turned on, it might be because the ice is full or the ice tray baffle remains open. Ensure that the ice tray baffle can open and close automatically.
General| Model | Antarctica |
|---|---|
| Ice Production Capacity | 12 kg/24h |
| Ice Cube Shape | Bullet |
| Power Consumption | 120 W |
| Color | Silver |
| Noise Level | 42 dB |
| Voltage | 220-240 V |
| Frequency | 50/60Hz |
| Cycle Time | 6-12 min |
To Next Page