Why is my Klarstein Ice Maker's “Ice basket full” indicator not working?
If the ice basket is full but the “Ice basket full” indicator does not illuminate on your Klarstein Ice Maker, the infrared light module might be interfered with by sunlight. Unplug the appliance and move it to a place not exposed to sunlight. Then, plug the appliance back in and activate it again.
What to do if the “Water reservoir empty” indicator turns on in my Klarstein Ice Maker?
If the “Water reservoir empty” indicator turns on, it means that the water level is low, or there is a lack of water. To solve this, stop making ice, refill the water reservoir, and then press the Start/Stop button. Another possible cause is a blocked water screen at the bottom of the water reservoir, so you should clean the appliance. If these steps don't resolve the issue, it may indicate a pump malfunction, in which case you should contact customer service.
Why does the “Ice basket full” indicator light up on my Klarstein Ice Maker?
If the “Ice basket full” indicator lights up on your Klarstein Ice Maker, it likely means the ice basket is indeed full, and the infrared light is blocked by the ice. Remove the ice from the ice basket. It could also mean that the infrared light emitting diode and the infrared light receiving diode do not work, so wipe any foreign objects from these components and restart the ice cube maker. If it still doesn't work, contact customer service.
What to do if the “Ice basket full” indicator blinks on my Klarstein Partytime Ice Maker?
If the “Ice basket full” indicator blinks on your Klarstein Ice Maker, it indicates that the ice shovel is blocked. Remove any ice that is obstructing the ice shovel. If no ice is blocking the ice shovel and the indicator continues to blink, contact customer service.
To Next Page
General