22
EN
4. Fix the outside chimney bracket on the outside chimney, and be sure that the
inside chimney can be adjusted the height in it freely. Afterwards, install the
chimney on the cooker hood and lift up expansion pipe till it out of the wall
through the hole on the wall.
5. Adjust the height of the inside chimney to the position of the inside chimney
bracket and x on it by screw, meanwhile,x the outside chimney on the
cooker hood body by screws. See Pic 5. After adjusting the position, x the
body with safety screw.
Note: The two safety vents are positioned on the back housing, with diameter
of 6 mm.
Outside chimney
Mounting bracket
Inside chimney
To Next Page
Loading...
