EasyManua.ls Logo

Klarstein LUMIO - Cleaning the Cooker Hood Body; Carbon Filter Installation

Klarstein LUMIO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
EN
Method 2:
If instructed to do so, it can be put into a dishwasher, set the temperature at
around 60 degrees.
Cleaning the cooker hood
To protect the main body from corrosion over a long period of time, the
cooker hood should be cleaned with hot water plus non corrosive detergent
every two months.
Please do not use abrasive detergent for it will damage the body.
Keep the motor and other spare parts free from water, as this will cause
damage to the appliance.
Before cleaning the appliance please remember to cut o power
The carbon lter shouldn’t be exposed to heat.
Please don’t tear open the xed bar around the carbon lter.
If the plug or cord is damaged, please replace it with special soft cord.
Installation of the carbon lter
Remove the grease lters. The charcoal lters are located at both end of the
motor. Turn the charcoal lters until they are unscrewed. The carbon lters should
be replaced every 3-6 months or if they show signs of damage.
open
close

Related product manuals