Klarstein MultiChef 4 - Flame Adjustment and Energy Saving

51
EN
Burner ⌀ Cookware diameter (cm)
Auxiliary burner 10-14
Semi-rapid burner 16-20
Rapid burner 22-24
Triple ring wok burner 24-26
⌀ 145 mm Ceramic burner 16.5
Flexible area 10-20 x 25-400
To identify the type of burner, refer to the designs in the section entitled, "Burner
and Nozzle Specications".
Flame selection
As the burners are adjusted correctly, the ame should be light blue, and the inner
ame should be clear. The size of ame depends on the position of the related
control knob.
The burner must be set at a large ame during the initial phase of cooking, which
makes food boil quickly. Then should turn knob to the saving ame position to
maintain the cooking. It is possible to adjust the ame size stepless.
It is prohibited to adjust the ame between the Burner OFF and Burner ON large
ame positions.
High quantity of energy can be conserved if the hob is used correctly, parameters
are designed correctly, and appropriate cookware is used. The energy
conservation be as follows:
• Up to 60% are conserved when proper pots are used,
• Up to 60% are conserved when the unit is operated correctly and the suitable
ame size is chosen.
It is a prerequisite for ecient and energy-saving operation of hob that the
burners are kept clean at all times (in particular the ame slots and nozzles).
Burner ON, large ame Burner ON, small ame
Burner OFF