Klarstein MultiChef 4 - Gas Source Conversion and Valve Adjustment; Converting Gas Source

62
EN
TABLE 2: How to convert gas source
Burners Flame Converting the
hob from LPG
to natural gas
Converting the
hob from natural
gas to LPG.
Regular burners Full ame Replace the
burner nozzle
according to the
guidelines in
Table 1.
Replace the
burner Nozzle
according to the
guidelines in
Table 1.
Saving ame Loosen the
adjustment.
Spindle (see g.
below)
And adjust the
ame.
Loosen the
adjustment.
Spindle (see g.
below)
And adjust the
ame.
Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving
ame position.
Remove the knob, and adjust the ame with a tiny screwdriver (see g. below).
To check the adjusted ame: heat the burner at full open position for 10 minutes.
Then turn the knob into the saving setting. The ame should not extinguish nor
move to the nozzle. If it extinguish or moves to the nozzle, readjust the valves.