29
EN
4. Remove the empty beer keg with beer valve from the appliance.
5. Press the left and right buttons on the beer valve device to pull the beer valve
device out of the empty beer keg (as shown in gure 13).
13
6. Take a new beer keg and repeat steps 5 - 9 of the section "Installation and
Use".
CLEANING THE BEER LINE AND THE VALVE DEVICE
When you use the device for the rst time or for a long time (it is recommended to
clean it once a week), clean the entire appliance with a dry cloth. Clean the beer
line from the tap and the valve device from the keg with warm water. The beer
hose assembly can be removed as follows:
To Next Page
Loading...
