22
EN
DEVICE OVERVIEW
1 Top cover handle 7 Digital control button
2 Top cover 8 Drip tray
3 Beer outlet connection 9 Power switch (on/off)
4 Keg 10 Back cover
5 Tap 11 Connection valve
6 LED screen 12 Air inlet connection
ASSEMBLY
1. Remove the beer cooler from the packaging. Place the beer cooler on a stable
and horizontal surface. Make sure that the beer cooler is at least 10 cm away
from other devices or the wall on each side so that the device is well ventilated
and can perform better.
To Next Page
Loading...
