EasyManuals Logo

Klarstein Quickstick Flex 10032905 User Manual

Klarstein Quickstick Flex 10032905
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
EN
OPERATION
Fill the container with water. Pay attention to the water level indicator on the unit (see
picture). The water level should be between the minimum and maximum indicated on
the front of the thermostat. Note that the water level still rises when you put food into the
container. Do not ll too much water.
Note: When the water temperature rises, the water starts to evaporate. The Sous-vide
Stick is equipped with an alarm that indicates a low water level. If the water level falls
below the minimum level, the unit switches off automatically.
Switch on the Device
Press the POWER button on the control panel for more than 5 seconds. The upper line
shows the set temperature. The middle row shows the current water temperature. In the
bottom line you see the set time and the current runtime.
SET Button
Press the SET button once to set the hour. Press the button twice to set the minute. When
the hour or minute ashes on the display, use the[+] or[-] button to set the time.
Water level
between Min and
Max indicator

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Klarstein Quickstick Flex 10032905 and is the answer not in the manual?

Klarstein Quickstick Flex 10032905 Specifications

General IconGeneral
BrandKlarstein
ModelQuickstick Flex 10032905
CategoryKitchen Appliances
LanguageEnglish

Related product manuals