13
EN
Set Celsius or Fahrenheit
You can display the temperature in °C or °F. Press the POWER and SET buttons
simultaneously to switch between °C and °F.
Set Time and Temperature
Press the [+] or [-] button to increase or decrease the time and temperature. The
maximum temperature setting is 95 °C (203 °F). The time can be set from 00:00 to
59:59 hours.
Cook Food
Press the POWER button once to start heating and circulating the water. Once the water
has reached the set temperature, place the food in the container.
As soon as the water has reached the set temperature, an acoustic signal sounds every
three seconds. Place the food in the container and press the SET button for 2 seconds
to stop the beep. If you have set a time, the remaining running time is displayed after 1
minute.
Switching off the Unit
When the set time has elapsed, the beep will sound again every three seconds. It
reminds you to take the food out. Turn the unit off by pressing the POWER button for 5
seconds.
DESCALING
With frequent use, descaling should be done every month or more often in regions with
hard water.
1 Put the appliance in a pot and ll the pot with water to the „Max“ level indicated on
appliance.
2 Set the appliance temperature to 70℃°C.
3 Add 5 g of citric acid powder (Food grade) per liter of water used.
4 Allow the water to circulate for 20 minutes after 70℃°C is reached.
5 Turn off and unplug the appliance.
6 When appliance is cool, rinse the bottom in the cold water and dry before storage.
To Next Page
Loading...
Need help?
General
