Klein Tools 935DAF User Manual

COMPOUND MITER CONVERSION TABLE / TABLA DE CONVERSIÓN DE INGLETE COMPUESTO / TABLEAU DE CONVERSION D'ONGLET COMPOSÉ
MITER ANGLE FROM DAF
ÁNGULO DE INGLETE DE DAF / ANGLE D'ONGLET DE DAF
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
38° – 52°
CROWN
CORONA
COURONNE
MITER ANGLE
ÁNGULO DE INGLETE / ANGLE D’ONGLET
0.6 1.2 1.8 2.5 3.1 3.7 4.3 4.9 5.6 6.2 6.8 7.5 8.1 8.7 9.4 10.0 10.7 11.3 12.0 12.6 13.3 14.0 14.6 15.3 16.0 16.7 17.4 18.1 18.8 19.6
BEVEL ANGLE
ÁNGULO DE BISEL / ANGLE DE BISEAU
0.8 1.6 2.4 3.2 3.9 4.7 5.5 6.3 7.1 7.9 8.6 9.4 10.2 11.0 11.8 12.5 13.3 14.1 14.9 15.6 16.4 17.2 17.9 18.7 19.5 20.2 21.0 21.7 22.5 23.2
45°
CROWN
CORONA
COURONNE
MITER ANGLE
ÁNGULO DE INGLETE / ANGLE D’ONGLET
0.7 1.4 2.1 2.8 3.5 4.3 5.0 5.7 6.4 7.1 7.8 8.5 9.3 10.0 10.7 11.5 12.2 12.9 13.7 14.4 15.2 15.9 16.7 17.5 18.2 19.0 19.8 20.6 21.4 22.2
BEVEL ANGLE
ÁNGULO DE BISEL / ANGLE DE BISEAU
0.7 1.4 2.1 2.8 3.5 4.2 4.9 5.6 6.4 7.1 7.8 8.5 9.2 9.8 10.5 11.2 11.9 12.6 13.3 14.0 14.7 15.4 16.0 16.7 17.4 18.1 18.7 19.4 20.0 20.7
MITER ANGLE FROM DAF
ÁNGULO DE INGLETE DE DAF / ANGLE D'ONGLET DE DAF
31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
38° – 52°
CROWN
CORONA
COURONNE
MITER ANGLE
ÁNGULO DE INGLETE / ANGLE D’ONGLET
20.3 21.0 21.8 22.6 23.3 24.1 24.9 25.7 26.5 27.3 28.2 29.0 29.9 30.7 31.6 32.5 33.4 34.4 35.3 36.3 37.2 38.2 39.2 40.3 41.3 42.4 43.5 44.6 45.7 46.8
BEVEL ANGLE
ÁNGULO DE BISEL / ANGLE DE BISEAU
23.9 24.7 25.4 26.1 26.9 27.6 28.3 29.0 29.7 30.4 31.1 31.8 32.5 33.2 33.9 34.5 35.2 35.8 36.5 37.1 37.8 38.4 39.0 39.6 40.2 40.8 41.4 41.9 42.5 43.0
45°
CROWN
CORONA
COURONNE
MITER ANGLE
ÁNGULO DE INGLETE / ANGLE D’ONGLET
23.0 23.8 24.7 25.5 26.3 27.2 28.1 28.9 29.8 30.7 31.6 32.5 33.4 34.3 35.3 36.2 37.2 38.1 39.1 40.1 41.1 42.1 43.2 44.2 45.3 46.4 47.4 48.5 49.6 50.8
BEVEL ANGLE
ÁNGULO DE BISEL / ANGLE DE BISEAU
21.4 22.0 22.7 23.3 23.9 24.6 25.2 25.8 26.4 27.0 27.6 28.2 28.8 29.4 30.0 30.6 31.1 31.7 32.3 32.8 33.3 33.9 34.4 34.9 35.4 35.9 36.4 36.8 37.3 37.8
FIG. A
7
BASED ON: 1390613 Rev 04/23 A
935DAF
DIGITAL ANGLE FINDER
MEDIDOR DIGITAL DE ÁNGULOS
RAPPORTEUR D’ANGLES NUMÉRIQUE
6' IP54
INSTRUCTIONS/INSTRUCCIONES/INSTRUCTIONSINSTRUCTIONS/INSTRUCCIONES/INSTRUCTIONS
3
6
4
5
B C D E F
A
1
2

Klein Tools 935DAF Specifications

General

Model	935DAF
Category	Measuring Instruments
Auto Power Off	Yes
Display	Backlit LCD
Measurement Functions	AC/DC Voltage, Continuity
Batteries	2 x AAA
Material	Plastic
Special Features	Data hold, Low battery indicator
Measurement Range	0° to 180°
Operating Temperature	0°C to 40°C
Storage Temperature	-10°C to 50°C
Resolution	Varies by function (see manual)

Summary

General Specifications and Warnings

General Specifications

Details measurement range, accuracy, resolution, operating conditions, dimensions, weight, and ingress protection.

Safety Warnings

Provides critical instructions for safe operation, emphasizing eye protection and potential injury risks.

Device Features and Functions

Feature Details (FIG. A)

Identifies key device components including rulers, display, buttons, and icons.

Buttons and Functions

Explains how to power on/off, zero the device, and lock the rulers.

Miter Saw Blade Calculator

Guides on calculating miter saw blade angles for simple and compound cuts using the device.

Maintenance and Support

Battery Replacement

Instructions for replacing the device's battery when the low battery indicator appears.

Cleaning and Storage

Recommendations for cleaning the device and proper storage procedures.

Warranty and Disposal

Information on product warranty, proper disposal, and FCC/IC compliance.