Klein Tools 93LDM100C - User Manual

SYMBOLS ON INSTRUMENT
Warning or
Caution
Read
instructions
Laser Radiation
Laser
Class 2
Do not stare
into beam
Conformité
Européenne:
Conforms with
European Economic
Area directives
UKCA: United Kingdom Conformity
Assessment
WEEE –
Electronics
disposal
Battery type
& orientation
Multi-Function
Button quick-
reference guide
WARNINGS
Read, understand, and follow these instructions to ensure safe operation,
Failure to observe these warnings can result in injury.
WARNING: LASER RADIATION. DO NOT STARE INTO BEAM. Class 2 laser.
• Exposing eyes to laser radiation can result in severe and permanent eye injuries.
NEVER look directly into the laser beam emitted by this instrument.
• DO NOT use the instrument if it appears to be damaged.
• DO NOT modify the instrument in any way, as to do so could result in emission of
hazardous laser radiation than could result in severe eye injuries.
• DO NOT use optical equipment such as lenses, prisms, optical scopes, etc. to transmit,
retransmit, or view the laser beam as this could result in severe eye injuries.
• This product should not be used by untrained operators or operators who have not
read and fully understood the instructions.
• DO NOT remove warning labels from this instrument as this could result in serious
personal injury and increases the risk of exposure to hazardous laser irradiation.
• This instrument is IP54 dust & water resistant. Following any contact with water,
thoroughly dry the instrument with a dry, lint-free cloth.
• There are no user serviceable parts in this instrument.
93LDM100C
Compact Laser Distance Measure – Instructions
Medidor compacto de distancia láser – Instrucciones
Télémètre laser compact– instructions
ENGLISH
GENERAL SPECIFICATIONS
Klein Tools 93LDM100C Laser Distance Measure is able to take single or
continuous measurements at distances up to 100' (30.5 m).
• Units: Inches / Feet & Inches / Meters
• Laser Class: Class 2
• Laser Type: 630 to 670nm, <1mW
• Measurement Range*: 0.17 to 100' (0.05 to 30.5 m)
• Accuracy*: +/- 1/16" (+/-1.6 mm) for ≤ 32.8' (10 m),
+/- 1/8" (+/- 3.2 mm) for >32.8' (10 m)
• Beeper Sound: 60 +/-10 dB
• Memory / Storage: 2 stored readings on LCD screen
• Auto-Off: Laser: 30 sec, Device: 3 min
• Operating Temperature: 32° to 104°F (0° to 40°C)
• Storage Temperature: -4° to 140°F (-20° to 60°C)
• Battery Type: 2× AAA 1.5V Alkaline
• Dimensions: 4.7" × 1.26" × 1.13" (119 × 32 × 29 mm)
• Weight: 2.29 oz. (65g)
• Ingress Protection: IP54
• Drop Protection: 6.6 ft (2 m)
*NOTE: Measurement range and accuracy are based on typical
conditions and may deteriorate under unfavorable conditions such
as bright sunlight or poor reflectivity.
Specifications subject to change.
CONTINUED ON OTHER SIDE
FIG. 1
FIG. 2
2
3
4
1
A
F
H
G
EB D C
Device (FIG. 1)
1. Multi-Function Button 3. Battery Cover
2. Backlit LCD Screen 4. Battery Cover Screw
FEATURE DETAILS
LCD Display (FIG. 2)
A. Laser ON Indicator D. Sound ON/OFF Indicator
B. Reference Point Indicator:
B1: Top B2: Bottom
E. Temperature Out Of Range Indicator
F. Latest Value / Continuous Reading
C. Battery Status Indicator G. Value #1 H. Value #2
1390499 Rev. 09/21 B
SELECT
A
LAYER
B1
SELECT
A
LAYER
B2
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30

Summary

Safety Information

Laser Radiation Hazards

Detailed laser safety warnings including eye injury risks from Class 2 laser.

General Safety Precautions

Precautions for safe operation, including instrument integrity and user training.

Instrument Features

Key Components and Indicators

Identifies main device components and explains LCD display indicators for status.

Operating Instructions

Power, Units, and Reference Points

Guide to powering the device, setting measurement units, and choosing reference points.

Measurement Modes

Instructions for performing single and continuous distance measurements.

Troubleshooting and Maintenance

Error Messages Explained

Explains common error messages and their resolutions, including battery and temperature issues.

Care and Disposal

Instructions for battery replacement, cleaning, storage, and proper device disposal.

Klein Tools 93LDM100C Specifications

General

Type	Laser distance meter
Display type	Digital
Product color	Black, Orange
Memory function	Yes
Housing material	Acrylonitrile butadiene styrene (ABS), Polycarbonate (PC), Rubber, Silicone
Display technology	LCD
Distance measuring units	ft, in, m
International Protection (IP) code	IP54
Number of batteries included	2 pc(s)
Battery type	AAA
Number of batteries supported	2
Accuracy	3 mm
Maximum measurement distance	30.5 m
Minimum measurement distance	0.051 m

Weight and Dimensions

Depth	33 mm
Width	28 mm
Height	119 mm
Weight	65 g