Title of this help project13
© 2003 Klein Instruments Corporation
6.2 Data Logging Multiple White Specs
The Data Logging for Multiple Specs is similar to the Data Logging for a single Spec. However, in the
Data Logging window, two (or three) separate white point spec files can be used for the OK/NoPass
criteria. The picture below shows two White Point Specs being used, "9300" and "6500".
To set up the Logging function to log one display for two white point settings, open the Calibrate menu
item, select a Model Spec file that has 2 or more Inspection Specs (see the section Custom Calibration
to see how to create a set of two or more Model Specs for one Model).
To Next Page
Loading...
Need help?
General
