Title of this help project23
© 2003 Klein Instruments Corporation
3. Aim the klein colorimeter at the precise same target area, and press the "Auto Measure" button. The
target areas will flash different colors, and in several seconds a color correction file will be created which
should cause the klein colorimeter to precisely match the reference colorimeter for THIS display and
4. Press the "Store As" button to save the new Color Correction file to the colorimeter head.
Choose a new file number, File Name, and File Extension, and press "Store Now".
Making a dual (or tripple) white point spec:
If there is to be a second (or third) white point spec for this same montior, you may recall the first spec,
put a number (2 or 3) in the box for "Inspection Spec Count", and store it again. Then recall it once more,
modify the xyY (or u'v'Y) spec and tolerance values, then Store it. Give it the file number of the next
consecutive number following the first spec file for that monitor. Give it a file extension that makes sense
(9500 for 9400 degrees kelvin white or whatever). Do a "Store Now". This will give you a second spec file
To Next Page
Loading...
Need help?
General
