7 Charge Plate Mode
4.2. Saving Data
It is possible to save the measured data in the internal memory. After every measurement the
device prompts :
By pressing button «B» the current data are discarded and the next measurement can be per-
formed.
By pressing button «A» the saving is initiated. In event of free space section 4.2.1 is displayed. In
the case of full memory (99 entries) the device announces for 2s:
To save the data nevertheless the memory has to be erased. Therefore the following prompt is
displayed:
Skip the deleting process by pressing button «B» and continue to the next measurement. The
last result disappears from the display and cannot be saved.
Important: It is strongly recommended to copy all data with the provided software to a pc. In
this case the memory can be erased without losing precious data.
After erasing the whole memory by pressing button «A», the device proposes the storage space
FILE NO: 01 for saving the last measurement.
DELETE FILES?
To Next Page
Loading...