Step 1 - Once your contents are in the Jug you are to lock and secure the lid into place. The ON/OFF button
will now start to flash and the selector wheel will appear to have no numbers. (E01 will appear if the lid is not
properly secured or aligned with handle. The lid not being locked in will cause the Mealio™ to not function
which is a safety feature).
Step 2 - Select/Touch the ON/OFF button and you will see that the flashing has disappeared and the 8 Pre
Set Programs and the touch control panel will light up. The Selector Wheel Screen will now appear to have the
numbers 00:00 in the first row and 0 on the second row.
Step 3 - Turn the Selector Wheel in an anti-clockwise direction to select the Paste function, then Select/Touch
the ON/OFF button and this will start the Paste blending process. You will begin to have the liquid in the jug
boil to 100 degrees C, during this time you will also see some blending action occur through the boiling
process. Once it has hit 100 degrees C the 17 minute pre-set time for this program will begin.
Step 4 - When the Pre-Set timer of 17 minutes for the paste program finishes, the Mealio™ will sound an alarm
allowing you to know that this has now been completed and it will stop heating, cooking and blending. After
the program has finished it will resume to being on standby mode and you may let it sit to rest.
Note: If E01, E03, E04 or E05 appears to be displayed you on your selector wheel screen during your
cooking process at any time please DO NOT panic and go to PAGE 16 for more information on what these
safety errors mean.
INGREDIENTS WARNING: Please ensure that all wet ingredients such as the liquids (cream and water) is to
go in first , then is to be followed by any other dry ingredients at the top such as (beans, potato’s and
legumes). Any spices, stock cubes and powdery substances is to be added into the Mealio™ last to avoid any
of these products sticking to the base of the Mealio™ Jar. Please make sure that the produce and liquid is
cold/raw to prevent the Mealio™ from overheating (RAW MEAT IS NOT TO BE ADDED INTO THE MEALIO™). If
you are adding pre-cooked ingredients please make sure it has completely cooled down and is cold before
The Paste Program is designed to create dierent pastes and sauces such as a pesto paste, an alfredo sauce, a
tomato pasta sauce and a tomato paste. Please see our website www.klevarange.com.au and go to our Mealio™
page to see other fun recipes. This pre-set paste program does require for the recipe to have some liquid to start
it o. We recommend you to use the PULSE function on ingredients before starting the PASTE program.
HOT BLENDING
Paste
- Hot Blending, 17 Minute Pre-set
Please refer to The Next Page of the instruction
Manual for COLD BLENDING PRESETS.
To Next Page
Loading...