20
Assurance of conformity
Type: Rotary lawnmower with combustion engine
Manufactured by: Klippo AB
Brand: Klippo
Technical responsible:Sven Norén
Tested at: Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden Notified body no: 0404
Issued in Malmö, Sweden 22th of september 2004
...................................................................
Roger Klotz, Managing Director, Klippo AB
Klippo original spare parts have to be used if the CE-marking should be valid.
The undersigned, Roger Klotz, c/o Klippo AB, Knivgatan 3 - 7, SE-212 28 Malmö, Sweden, do hereby certify that the
following lawnmowers conform to the essential health and safety requirements in the Directive 98/37/EEC and EN836
and conform to the demands of the Directive 2000/14/EG regarding noise and Directive 89/336 concerning electomgnetic
compability.
Tested accordingly to EN836 and ISO11094.
The judgement of the conformity of the Directive 2000/14/EG has been done according to Annex VI in the mentioned
Directive.
Vibration level: See Technical specifications, page 44!
Model Serial Engine Engine- Measured Garanteed Operators- Blade Cutting
type number -volume noise level noise level noise level type width
-power dB(A) dB(A) type dB(A) cm
cc/hp
Excellent S K05630 B&S Quantum 50 190/5,0 92 96 81 Mulcherblade 48
Exc S Selfstart K05640 B&S Quantum 50TM
190/5,0 92 96 81 Mulcherblade 48
Exc S SD K05660 B&S Quantum 50 190/5,0 95 96 85 Mulcherblade 48
Pro 19 S K06720 B&S Intek Edge 60 190/6,0 91 96 79 Mulcherblade 48
Pro 19 S K06750 B&S Intek 55 170/5,5 92 96 79 Mulcherblade 48
Comet S K03000 B&S Quantum 50 190/5,0 92 100 82 Blade plate 53
Comet SE K03100 B&S Quantum 50ES 190/5,0 93 100 82 Blade plate 53
Pro 21 S K08110 B&S Intek 60 190/6,0 92 100 82 Mulcherblade 53
Pro 21 S K08120 B&S Intek 55 170/5,5 92 100 82 Mulcherblade 53
To Next Page
Loading...
Need help?
General
