Klipsch BAR 48 Firmware Update Instructions

FIRMWARE UPDATE INSTRUCTIONS
Download the update file from
Klipsch.com/firmware to an empty USB
Flash Drive (FAT32 format) .
Continue holding the Power Button until ALL
Indicator Lights light up in order.
DTS > DOLBY > SUR > DIALOG > NIGHT
Press and hold the Power Button while plugging
in the Power Cable.
Insert the USB Flash Drive into the USB port on
the back panel of your Sound Bar.
Turn the Power Switch “OFF” and unplug the
Power Cord.
3 4
5
2
1
After the lights go out release the Power Button.
Your Sound Bar will restart.
Problems or questions? Submit a request!
6
Sound Bar
100-240 V~1A
100-240 V~1A
BAR 48
Troubleshooting/Service

Klipsch BAR 48 Specifications

General

RMS rated power	440 W
Audio output channels	3.1 channels
Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Tweeter diameter	25.4 mm
Mid-range driver diameter	76.2 mm
Number of tweeter drivers	3
Number of mid-range drivers	4
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	3 \
HDMI ports quantity	-
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Product color	Black
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	86 mm
Width	1211 mm
Height	73 mm
Cord length	1.5 m
Soundbar weight	- g
Subwoofer width	302 mm
Subwoofer height	410 mm