Klipsch R-8SW User Manual

FIGURE 2
LINE LEVEL CONNECTIONS
LINE IN
R
L/LFE
LR
LINE IN
R
L/LFE
Processor/Pre-Amp/Receiver Processor/Pre-Amp/Receiver
PRE • OUT
LFE OUTPUT
Left and Right pre-outs on Processor/
Pre-Amp/Receiver connected to Left and Right
line inputs on subwoofer amplifier
LFE Output on Processor/Pre-Amp/Receiver
connected to LFE input on suboofer amplifier
OR

Klipsch R-8SW Specifications

General

Frequency Response	38Hz - 120Hz +/- 3dB
Amplifier Power	150W
Amplifier Type	Class D
Amplifier Power RMS/Peak	50W / 150W
Enclosure Material	MDF
Inputs	Line Level / LFE RCA Jacks
Driver Size	8"
Enclosure Type	Bass Reflex
Woofer Material	IMG
Voltage	100V-240V 50/60Hz
Low Pass Crossover	40Hz - 120Hz
Phase Control	0-180 degrees