Klipsch SW-10 User Manual

Guidance for setting up audio systems with Klipsch subwoofers and speakers.

Guidance for setting up home theater systems with Klipsch subwoofers and speakers.

Precautions regarding electrical connections and outlet usage.

Warnings against operating in humid or extreme temperature conditions.

Caution against operating at full amplifier output to prevent distortion and damage.

Advice on positioning speaker wires to avoid tripping hazards.

Recommendations for placing the subwoofer for best low-frequency response.

Essential clearances and proximity guidelines for subwoofer placement.

Diagrams for connecting SWV, SW-8, SW-10 via speaker level inputs.

Diagrams for connecting SW-12, SW-15 via speaker level inputs.

Diagrams for connecting SW-8, SW-10 via line level inputs to pre-amp/power amp.

Diagrams for connecting SW-12, SW-15 via line level inputs to pre-amp.

Diagram for connecting to A/V receiver/surround processor via line level mono output.

Description of the subwoofer's power switch location and function.

Adjusts subwoofer volume relative to other speakers.

Variable filter for upper frequency limit, matching subwoofer to main speakers.

Adjusts subwoofer polarity for optimal system output and bass response.

Addresses issues like improper connections, low level control, or LED status.

Solutions for hum interference, including AC adapters and cable line isolation.

Suggests switching to high-level inputs to reduce radio frequency interference.

Explains series wiring on receivers causing volume loss with Speaker B connections.

Technical details for the SWV model, including dimensions, driver, and finishes.

Technical details for the SW-8 model, including dimensions, driver, and finishes.

Technical details for the SW-10 model, including dimensions, driver, and finishes.

Technical details for the SW-12 model, including dimensions, driver, and finishes.

Technical details for the SW-15 model, including dimensions, driver, and finishes.