Need help?Do you have a question about the Klipsch Reference Series SW-110 and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Frequency Response | 32Hz - 120Hz |
| Enclosure Material | MDF |
| Phase Control | Yes |
| Auto Power On/Off | Yes |
| Driver Size | 10" |
| Woofer | 10" |
| Enclosure Type | Bass-reflex |
| Inputs | Line Level RCA |
| Phase | 0-180 degrees |
| Low Pass Crossover | 40Hz - 120Hz |
| Amplifier Power | 200 watts RMS (450 watts peak) |
Comprehensive safety guidelines, warnings, and cautions for safe operation.
Guidance on checking for transit damage and proper unpacking.
Connects via a line-level subwoofer output from a receiver.
Connects using speaker wire from amplifier speaker terminals.
Adjusts the subwoofer's volume relative to other speakers.
Sets the crossover frequency for bass management.
Used to acoustically match subwoofer output to main speakers.
Controls the subwoofer's power state and auto-on functionality.
Indicates the operating status of the subwoofer's amplifier.
Information regarding radio frequency energy and interference.
Details on conformity with European Union directives.
Guidelines for the disposal of waste electrical equipment.
To Next Page