Need help?Do you have a question about the Klipsch SW-110 and is the answer not in the manual?
Connects to receiver's line level subwoofer output for music and movies.
Uses speaker wire to connect to amplifier's speaker terminals.
Adjusts subwoofer volume to match main speakers' output level.
Sets crossover frequency for bass frequency transition.
Connects to receiver's line level subwoofer output for music and movies.
Uses speaker wire to connect to amplifier's speaker terminals.
Adjusts subwoofer volume to match main speakers' output level.
Sets crossover frequency for bass frequency transition.
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Maximum Acoustic Output | 110 dB |
| Amplifier | Built-in |
| Low Pass Crossover | 40Hz - 120Hz |
| Auto Power On/Off | Yes |
| Amplifier Power | 200W RMS |
| Enclosure Type | Bass-reflex |
| Inputs | Line-level, LFE |
| Phase | 0-180 degrees |
| Frequency Response | 28Hz - 120Hz |
| Phase Control | Variable |
To Next Page
