Need help?Do you have a question about the KLM 2M-14C and is the answer not in the manual?
Prepare assembly area, gather tools, and check components against the parts list before starting.
Assemble boom sections by matching letters, aligning holes, and securely fastening joints with hardware.
Mount dipole elements to insulators using specified screws and hardware, repeating for all driven elements.
Mount parasitic elements using insulators, centering them on the boom for optimal antenna performance.
Mount the antenna on a non-conductive mast, route and secure feedline/DC lines, ensuring proper installation.
Guidance on using the antenna as separate feeds or stacking with others, including spacing recommendations.
To Next Page
General