To Next PageTo Next Page
Need help?Do you have a question about the Klockner Moeller PS4-151-MM1 and is the answer not in the manual?
Describes the process of updating or installing drivers using an internet connection via MAC Programmer+.
Details how to install or update drivers from a disk using MAC Programmer+.
Configuration steps within MAC Programmer+ for communication via SUCOM-A protocol.
Configuring communication settings between the terminal and PLC system via the Peripherals menu.
Process of downloading the selected driver into the terminal via the Project Transfer menu.
Information regarding settings required within the PLC system for terminal communication.
Describes point-to-point connection methods using RS-422 or RS-232C ports.
Details on addressing digital objects, including type, address, and comments on usage.
Explains addressing for analog objects, type, address, comments, and specific PS4-series requirements.
Lists and describes error messages encountered for all controllers and specifically for the PS4-series.
Identifies signals that are continuously read and impact communication speed in the PLC system.
Lists signals that do not influence the communication time between the terminal and the PLC system.
Provides methods to improve communication speed, including grouping signals and efficient block changes.
Explains how signals are packaged for transfer and how package size affects communication speed.
Detailed pinout configurations for RS-232 and RS-422 connections for various MAC/MTA models.
Schematic diagram for CAB6 cable, detailing connections between PC, Operator Terminal, and specific port assignments.
Diagram for CAB5/3m cable, illustrating connections between PC and Operator Terminal, including pinouts.
Diagram for CAB12 cable, showing PC to E-terminal connections and pin assignments.
General| Brand | Klockner Moeller |
|---|---|
| Model | PS4-151-MM1 |
| Category | Controller |
| Language | English |
