Klockner Moeller PS Series - User Manual

Driver for Klockner Moeller PS series
English
Svenska
© Beijer Electronics AB 2000, MA00500, 2000-09
Beijer Electronics AB reserves the right to change information in this manual without
prior notice. All examples in this manual are used solely to promote understanding of
how the program works and its operation. Beijer Electronics AB take no responsibility if
these examples are used in real applications.

Summary

Introduction

Install and Update Driver

Installation of Driver Using Internet

Details driver installation using an internet connection via the MAC Programmer+ software.

Installation of Driver from Disk

Explains how to install drivers from a diskette or other local media.

Connecting the Terminal to the PLC System

Settings in the MAC Programmer+

Specifies the essential settings within the MAC Programmer+ software for communication.

Communication Setup

Details the configuration of communication parameters between the terminal and the PLC.

Transfer the Driver to the Terminal

Describes the procedure for transferring the selected driver to the terminal.

Settings in the PLC System

Refers to the PLC system's manual for specific configuration details.

Point-to-point Connection

Explains the physical wiring and connection methods for point-to-point communication.

Addressing

Comments about Digital Objects

Provides specific notes on handling and potential issues with digital objects.

Comments about Analog Objects

Offers guidance on addressing analog objects for Klockner Moeller PS4 series.

Error Messages

Lists common error messages and their explanations for controller communication.

Efficient Communication

Signals Affecting Communication Time

Identifies which signals influence communication speed and how.

Signals Not Affecting Communication Time

Lists signals that do not impact the communication speed.

Communication Optimization Strategies

Covers grouping signals, block changes, clock usage, and signal packaging for efficiency.

Drawings

RS-232 Connections

Pinout and cable details for RS-232 interfaces on specific MAC models.

RS-422 Connections (Type 1)

Pinout and cable details for RS-422 interfaces on MAC 40+/Exxx, MTA-100/Exxx.

RS-422 Connections (Type 2)

Pinout and cable details for RS-422 interfaces on MAC 50/90, MTA-250/G1.

CAB6 Cable Diagram

Shows the wiring diagram for the CAB6 cable between PC and operator terminal.

CAB5 Cable Diagram

Details the wiring for the CAB5 cable connecting PC and operator terminal.

CAB12 Cable Diagram

Illustrates the CAB12 cable configuration for PC, E-terminal, and PC.

Klockner Moeller PS Series Specifications

General

Brand	Klockner Moeller
Model	PS Series
Category	Controller
Language	English