klover E-CONNECT 1700 - Technical Characteristics

16.4
Watt
230
25
kcal / h
CO measured at 13% oxygen at nominal heat output
ITALIAN
Nominal heat output
92.1
Minimum chimney draft at nominal heat output
Power absorbed only during the ignition cycle.
10
° C
kcal / h
%
Smoke outlet pipe diameter
Maximum electrical absorption
Ventilated pellet tank capacity (ducted)
g /
sg /
s
kg ° C
4.2
3,600
mm
kW
Efficiency at reduced thermal power
0.013
Mass of combustion gases with reduced thermal power
All the technical data sheets of dimensions and connections are visible by scanning the following QR Code from your smartphone:
*
kcal / h
Watt
40
9.7
kW
%
Nominal frequency
Minimum safety distance from flammable materials (side / rear / front)
15.1
12.980
mm
50
200
Efficiency at nominal heat output
0.003
Mass of combustion gases at nominal heat output
Dimensions and connections data sheets
4.5
3,870
kW
%
400 *
9.6
Average flue gas temperature at reduced heat output
CS.ECN1700.IST-1 / Rev 1.0
Reduced heat output
Pa
Air intake pipe diameter
Hz
80
60
kcal / h
%
Nominal tension
14.100
V.
50
100
Technical features
Reduced heat output
93.5
Minimum draft to the chimney at reduced heat output
The heat output produced by the appliance may vary according to the type of pellet used.
Nominal heat output
Pa
10
mm
kW
CO measured at 13% oxygen at reduced heat output
Electric absorption in operation
Average flue gas temperature at nominal heat output
4
https://docs.klover.it/it/guide/help/cs-ecn1700-tds-1
E-CONNECT 1700
Machine Translated by Google