KMC Controls STE-6010 - STE-6000 Series Overview

STE-6000 Series Room Temperature Sensors 2 Applications Guide
STE-6000 Series Overview
These compact, stylish, and economical room
temperature sensors are designed for use in KMC
Digital controllers or other building automation
systems. They incorporate a 10,000 ohm (@ 77°
F) thermistor for the sensing element, providing
precise, stable temperature sensing. The low prole
and durable thermostat-style cover are visually
appealing. These sensors may be surface mounted on
a hollow wall or to a 2 x 4 in. electrical box.
The STE-6000 Series is specically designed to
complement the KMC Digital controllers.
An STE-6010/6011 contains a thermistor only.
An STE-6014/6017/6019/6018/6020 includes a rotary
setpoint dial (available in degrees F or C).
An STE-6013/6015/6017/6019/6018/6020 allows selec-
tion of an override condition by pushing the buon
on the front. A green status LED (not on the STE-
6017/6019) illuminates according to the user-dened
controller conguration (e.g., during setback/setup
or during normal/override modes).
An STE-6012/6016 includes an LCD display for the
room temperature and setpoint. The temperature
display can be toggled between Fahrenheit and
Celsius scales. The setpoint is adjustable via the
up and down arrow buons on the front panel. If
the system is in normal/override mode, pressing a
buon will raise or lower the setpoint. When either
buon is pushed, the display will toggle from room
temperature to the setpoint. When the buon is
released, the number displayed is the new setpoint,
and the display will return to room temperature aer
ten seconds. If the system is in setback/setup (for
heating/cooling) mode, pressing either buon selects
override mode.
An STE-6010/6014/6015/6016/6017/6018 includes a
four-pin EIA-485 (formerly RS-485) data port on
the cover’s underside for easy temporary computer
connection to the network. (Access with a KMD-5624
cable.)
For more specications and mounting instructions,
see the Data Sheet and the Installation Guide for
the STE-6000 series.
The following models are available:
Accessories available include:
◆ HMO-6036: Universal Backplate
◆ KMD-569x: STE-6010/6014/6015/6016 to Con-
troller Cable with RJ-45 to RJ-11 Connectors (-
5693 = 25 ft.; -5694 = 50 ft.; -5695 = 75 ft.)
◆ KMD-5624: PC Data Port (EIA-485) Cable
◆ KMD-5576: EIA-485 to USB Communicator
The standard color is almond. To order in white
(minimum quantity of 250 required), add a “W” in the
place of the hyphen near the end of the model number
(e.g., STE-6012W10).
STE-
601x
Model
Number
Setpoint
Adjust
Other
Interface
Features
Cable
Connections
Temper-
ature
Output
Rotary Dial
Up/Down Buttons
Override Button(s)
LCD Display
LED Status Indicator
Screw Clamp Terminals
RJ-45 Connector
EIA-485 Data Port
10k Ohms Thermistor
0 to 5 VDC
6010-10 X X X
6011-10 X X
6013-10 X X X X
6015-10 X X X X X
6012-10 X X X X X
6016-10 X X X X X X
6014-10 ° F X X X
6014-11 ° C X X X
6017-10 ° F X X X X
6017-11 ° C X X X X
6019-10 ° F X X X
6019-11 ° C X X X
6018-10 ° F X X X X X
6018-11 ° C X X X X X
6020-10 ° F X X X X
6020-11 ° C X X X X