Securely support any machine elements that must be
raised for service work．
Keep all parts in good condition and properly installed．Fix
damage immediately．Replace worn or broken parts．
Remove any buildup of grease，oil，or debris．
On self-propelled equipment，disconnect battery ground
Cable (一) before making adjustments on electrical
systems or welding on machine．
On towed implements，disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine．
★Service Cooling System Safely
Explosive release of fluids from pressurized cooling
system can cause serious burns．
Add make-up coolant through the external container，not
directly to the radiator．
If radiator cap must be removed，do not remove when
engine is hot．Shut engine off and wait until cap is cool
enough to touch with bare hands．Slowly loosen cap to
first stop to relieve pressure before removing completely．
★Service Tractor Safely
Do not service the tractor while it is in motion or while the
engine is running．
When servicing front-wheel-drive-equipped tractor with
rear wheels supported off ground and rotating wheels by
engine power，always support front wheels in a similar
manner．Engaging front-wheel drive will pull rear wheels
off support if front wheels are not raised．
Tighten wheel hardware to correct torque as specified in
Wheels，Tires and Tread section．Torque at intervals
shown in Break-In Period and Lubrication and
Maintenance sections，to ensure that wheel hardware
does not loosen．
Reinstall protective covers removed during service．
To Next Page
Loading...
