34
pull the lever backwards. To lower the
implement, push the lever forwards.
To achieve a consistent working depth, adjustable
stops B can be set to ensure the implement
returns to the same depth each time.
Lowering Speed Control
The lowering speed control A is situated in the centre of the seat
bulkhead.
This control is used to adjust the lowering speed of the
implement attached to the hydraulic three point linkage
To slow the downward speed of the implement, turn
the control knob clockwise.
To increase the downward speed of the implement,
turn the control knob anti-clockwise
To lock the implement in any position, turn the control knob
fully clockwise. Always lock the lowering speed control
when travelling on the road, replacing tyres or blades on
an implement, or making any adjustment to an implement.
Stop Brake
The stop brake is situated in the seat bulkhead.
To engage the stop brake, depress the button B
and pull the stop brake upwards. To disengage,
depress the button A and move the stop brake
downwards.
To Next Page
Loading...
