KNEGT 254G2 - Transmission Controls; Forward;Reverse and Range Shift Levers; PTO Gear Selection

31
Forward/Reverse Lever
Stop the machine before moving
this lever. To select forward F,
or reverse R, move the lever to
the required position. When used
in combination with the main
gear lever and the range shift lever
eight forward and eight reverse
speeds can be achieved.
Range Shift Lever
Main Gear Lever
The main gear lever A is located to the front of the operator’s seat and provides four gears.
When used in combination with the range shift (lever B) eight forward and eight reverse speeds
can be achieved.
The clutch pedal must be depressed when changing gear
PTO Gear Selection Lever
A
A
Safety Precautions
★Recognize Safety Information
This is a safety—alert symbol．When you see this symbol
on your machine or in this manual，be alert to the
Potential for personal injury．
Follow recommended precautions and safe operating
practices．
★Understand Signal Words
A signal word—DANGER，WARNING，or
CAUTION—is used with the safety．alert symbol．
DANGER identifies the most serious hazards．
DANGER or WARNING safety signs are located near
specific hazards．General precautions are listed on
CAUTION safety signs．CAUTION also calls attention
to safety messages in this manual．
★Follow Safety instructions
Carefully read all safety messages in this manual and on
your machine safety signs．Keep safety signs in good
condition．Replace missing or damaged safety signs．Be
sure new equipment components and repair parts include
the current safety signs．Replacement safety signs are
available from your East Wind dealer．
Learn how to operate the machine and how to use
controls properly．Do not let anyone operate without
Instruction·
Keep your machine in proper working condition．
Unauthorized modifications to the machine may impair the
function and/or safety and affect machine life.
If you do not understand any part of this manual and need
l assistance，contact your East Wind dealer．
★Prevent Machine Runaway
Avoid possible injury or death from machinery runaway．
Do not start engine by shorting across starter terminals．
Machine will start in gear If normal circuitry is bypassed．
Fig.1
Fig.2
B
Safety Precautions
★Recognize Safety Information
This is a safety—alert symbol．When you see this symbol
on your machine or in this manual，be alert to the
Potential for personal injury．
Follow recommended precautions and safe operating
practices．
★Understand Signal Words
A signal word—DANGER，WARNING，or
CAUTION—is used with the safety．alert symbol．
DANGER identifies the most serious hazards．
DANGER or WARNING safety signs are located near
specific hazards．General precautions are listed on
CAUTION safety signs．CAUTION also calls attention
to safety messages in this manual．
★Follow Safety instructions
Carefully read all safety messages in this manual and on
your machine safety signs．Keep safety signs in good
condition．Replace missing or damaged safety signs．Be
sure new equipment components and repair parts include
the current safety signs．Replacement safety signs are
available from your East Wind dealer．
Learn how to operate the machine and how to use
controls properly．Do not let anyone operate without
Instruction·
Keep your machine in proper working condition．
Unauthorized modifications to the machine may impair the
function and/or safety and affect machine life.
If you do not understand any part of this manual and need
l assistance，contact your East Wind dealer．
★Prevent Machine Runaway
Avoid possible injury or death from machinery runaway．
Do not start engine by shorting across starter terminals．
Machine will start in gear If normal circuitry is bypassed．
Fig.1
Fig.2