EasyManua.ls Logo

Ko Propo EX-RR User Manual

Ko Propo EX-RR
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTIONMANUAL
KONDO KAGAKU Co., Ltd. 2016 Ver.1.02

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ko Propo EX-RR and is the answer not in the manual?

Ko Propo EX-RR Specifications

General IconGeneral
BrandKo Propo
ModelEX-RR
CategoryRemote Control
LanguageEnglish

Summary

For Safe Operation

When Installing Components

Precautions for installing components on the model to prevent malfunctions and damage.

Notes for Usage

Guidelines for using the transmitter safely in various environments and conditions.

Notes After Usage

Recommendations for handling and storing the transmitter and batteries after use.

Transmitter Battery Handling and Charging

Safety guidelines for handling, charging, and disposing of transmitter batteries.

Getting Started

Transmitter Assembly

Step-by-step instructions for assembling the transmitter unit.

Transmitter Dismantling

Instructions for safely disassembling the transmitter unit.

Installation of Xpansion unit

Preparations

Battery Installation

Procedure for correctly installing batteries into the transmitter.

Battery Level Warning

Explanation of low battery warning indicators and required actions.

Basic Operation

STEERING

Explanation of basic steering controls, trim, reverse, and balance adjustments.

THROTTLE

Explanation of basic throttle controls, trim, reverse, and travel adjustments.

3.4CH operation

Steering Wheel Adjustment

Throttle Trigger Adjustment

Procedures Prior to Operation

Switching On

Steps for powering on the transmitter and receiver correctly.

Model Confirmation

Verifying the selected model memory for operation.

Checking Movements

Testing transmitter controls before driving.

Switching Off

Steps for powering off the transmitter and receiver correctly.

Display and Control Method for attaching the Xpansion unit

Basic Operations to Change Settings

How to navigate menus and change settings using transmitter buttons.

VR information setting

How to change the Modulation mode

Pairing (For general receiver)

Pairing (For MiniZ MHS)

Countermeasures Against Noise

Fail-Safe Setting

TOP MENU

THROTTLE

FUNCTION

Model menu

Manages saving, copying, and resetting model memories.

TIMER menu

TIMER START

Starts and stops the timer function.

KEYSET Key setting

3.4CH menu

TWIN SERVO MODE

Configures settings for using two steering servos.

4WS MODE

Adjusts 4-wheel steering features.

AMP Mixing MODE

Controls front/rear wheel drive modes with separate ESCs.

T-MIX Throttle Mixing MODE

Controls independent front wheel braking.

TRIM SET

STEER AUTO TRIM

Automatically sets steering trim to neutral.

SYSTEM menu

VR INFORMATION

Calibrates steering and throttle sensor positions.

CONFIG

Configures the transmitter's operating environment.

BATTERY WARNING

Battery Level Warning

Displays warnings when transmitter battery voltage is low.

STEERING

TRIM menu

ST SPEED menu

DYNAMC Steering Dynamics

FEEL Steering Feel menu

REVERSE Steering Reverse

TRAVEL Throttle Travel

TRIM Throttle Trim

TH SPEED Throttle Speed

DYNAMC Throttle Dynamics

FEEL Throttle Feel

CYCLE menu

ATSTRT Throttle Auto-Start

OFFSET Throttle OFFSET

OVERRIDE

REVERSE Throttle Reverse

Related product manuals