Need help?Do you have a question about the Ko Propo EX-2 and is the answer not in the manual?
General| Brand | Ko Propo |
|---|---|
| Model | EX-2 |
| Category | Remote Control |
| Language | English |
Covers handling warnings, installation guidelines, and prohibited matters for safe usage.
Details on safe handling, charging procedures, and precautions for transmitter batteries.
Instructions for assembling and disassembling the transmitter unit.
Guides for adjusting steering wheel tension, throttle trigger, and position.
Information on unit connectors, charger jack usage, and power switch function.
Steps for battery installation and understanding battery level warnings.
Guidelines for proper antenna and receiver placement to minimize noise.
Specific installation procedures for electric and glow engine RC cars.
Steps for switching on/off, model confirmation, and movement checks.
Explanation of trim, sub trim purpose, and actual setting sequences.
How to navigate menus, select items, and change settings using transmitter keys.
Instructions for mounting the Xpansion unit to the front or side and its disassembly.
Description of startup screen version info and initial screen elements.
Procedure to calibrate steering and throttle potentiometer settings.
Guide to changing between FHSS and MHS modulation modes.
Steps for preparing the transmitter and receiver for pairing.
Steps for preparing the transmitter and Mini-Z for MHS pairing.
Index of the 6 different function menus available.
Index of the 6 different steering function menus.
Saving, selecting, copying, and resetting model memories.
Procedures for copying model settings and resetting to default factory values.
Details on trigger start, lap history, alarm, and navigation settings.
Configuration for 2-interval and 3-interval output settings.
Settings for 5-interval, continuous output, and gyro receiver modes.
Configuration for dual steering servos and 4-wheel steering.
Setting auto trim and auto balance for steering.
LCD display adjustments and battery type selection.
Explanation of low battery warnings and their indicators.
Functions for gear ratio calculation, buzzer settings, and VR calibration.
Adjusting key repeat delay and setting operation alarm.
Adjusting steering travel, balance, and overall movement.
Adjusting steering neutral position, range, and trim rate.
Modifying the speed of the steering servo's turn and return movements.
Adjusting steering angle to servo speed ratio and initial response.
Modifying the steering servo's cornering performance feel.
Procedure to modify the steering direction of the servo.
Adjusting maximum throttle movement for acceleration and braking.
Adjusting throttle neutral position, range, and trim rate.
Modifying the speed of the throttle servo's turn and return movements.
Adjusting throttle curve for acceleration/braking and initial response.
Modifying the throttle servo's overall feeling.
Setting brake override, steering travel override, and throttle reverse.
Adjusting throttle acceleration burst and ABS brake pumping.
Setting fixed throttle output at startup for launching.
Adjusting throttle neutral position for brake or idle up.
To Next Page
